Free resources
Guides, webinars, articles and tools for laboratory quality.
Search the whole site
Browse by format
Browse by topic
Measurement uncertainty
Estimate, explain and report uncertainty.
Analytical performance specifications
Set performance requirements for the intended use.
Verification and method comparison
Design studies and judge agreement.
Internal quality control
Understand control charts, signals and materials.
External quality assessment
Interpret targets, scores and trends.
Calibration and traceability
Follow calibration chains and reference values.
Laboratory risk and service review
Connect failures, harm and safeguards.
Statistics and interpreting results
Understand variation, interpretation and accuracy.
All free resources
No resources match. Try a shorter search or choose All topics to start again.
Guides
Follow the calibration chain and see where bias and uncertainty enter the assessment.
Follow a laboratory result through the calibrators and procedures that link it to its reference.
Compare results from two methods with the same stated reference and see where they differ in practice.
Compare two materials with the same assigned value and see how each affects patient results.
See why calibration can complete successfully while a separate control is outside its limits.
Explain the estimate, the evidence it uses and when to review it.
Follow the link between model inputs and uncertainty in the result.
Compare evaluation approaches and the evidence each needs.
Read the target, peer group and assessment rule behind the score.
See how the same difference can receive a different score when the assessment scale changes.
Compare paired patient and EQA results to see why specimen behaviour matters.
See how one result can move a peer mean and what to check about the comparison group.
Compare an isolated high score with a recurring difference in the same direction.
See how a shift can emerge across several runs and what to check when it does.
See how a problem can show up at one control concentration while another stays near target.
Follow a shift on the QC chart and see how paired patient results can help assess its significance.
Use the first result and the repeat together to decide what the repeat adds to the review.
See how a control-material lot change can affect the mean and what happens when you pool the results.
Start with the quantity measured, the intended use and the scope of the estimate.
Choose a statistic for the question you need to answer.
See what a histogram reveals about turnaround times from two laboratory workflows.
See how one unusual observation changes the mean, median and standard deviation.
Compare results from the same specimens to see what a paired analysis tells you.
See why two studies with the same estimated difference can have different p-values.
Check what your control data represent and what else contributes to the estimate.
Connect a possible failure to harm, safeguards and evidence that they work.
Follow a barcode alert to see what evidence shows whether a safeguard did its job.
Trace a wrong-record entry caught before release and see what the near miss reveals.
Compare the laboratory’s turnaround clock with the time from collection to first clinical review.
Compare routine rework with a failed urgent handover to see why one risk needs an earlier review.
Connect an analytical performance specification to the decision the result supports.
See how imprecision can change a decision classification and what evidence would connect that change to clinical outcomes.
Use a worked example to derive an imprecision target from within-person variation and compare it with an observed CV.
Use comparable laboratory data to evaluate a candidate performance benchmark.
Compare two fictional methods to see why bias and imprecision need separate requirements.
Separate verification from validation and define the scope of the study.
Choose an evaluation that fits a category or classification.
Use differences across the measuring range to assess agreement.
See how a study can span a wide range and still miss the concentration where a decision is made.
Follow one specimen through two dilutions and see what recovery says about extending the measuring interval.
Videos & webinars
An introduction to mean, variance, standard deviation and coefficient of variation, followed by bias, imprecision and their relationship to total error and measurement uncertainty.
Why laboratories need performance specifications, how clinical outcomes and biological variation inform model selection, and how specifications can support activities such as internal quality control.
An introduction to sensitivity, specificity, ROC analysis and likelihood ratios, with discussion of analytical and clinical accuracy, manufacturer claims, verification and validation.
Articles
Articles on Pathology Uncertainty
Understand why control-material choice must match the question.
Distinguish RMS, RMSE, SD and RSS by the question each answers.
Distinguish absolute and relative uncertainty across concentration.
Map the evidence available before choosing an uncertainty budget.
Understand why instrument/site/time scope matters to an estimate.
Distinguish a numerical difference, a reference interval and a clinical decision.
Pathology in Practice series
Choose a series to see its articles in publication order. Publisher links open in a new tab, and a free account is required to read the full articles.
Measurement uncertainty fundamentals (2017–2018)
Statistical quality control (2018–2020)
Method comparison studies (2020–2021)
Measurement uncertainty update (2024)
Risk management in laboratory medicine (2025–2026)
Practical statistics in laboratory medicine (2026)
Calculators & tools
Compare a sample mean with a specified reference value and check the assumptions behind the test.
Explore the shape and spread of probability distributions as you vary their parameters.
Explore APTT verification data using a CSV file or the built-in demo.
Downloads
Prepare for an uncertainty evaluation and record the evidence you need.
Work through an IQC signal and record the checks and follow-up actions.
Review an EQA result, its assigned target and the next steps.
Define your verification question and plan the evidence you need.
Email courses
Explain possible harm, controls and residual risk in a laboratory pathway.
Explain calibration chains, assigned values and the limits of traceability claims.
Understand target assignment, peers, scores and material limitations.
Recognise the questions to ask about control charts, signals and material.
Build introductory understanding of fitness for use and performance requirements.
Explain an uncertainty estimate and complete the established one-page introductory note.
Concepts explained
Definitions and connections between laboratory concepts, with links to supporting sources.